Gas fire pit repair and maintenance on the Eastside.
Gas fire pit repair for fire pits, fire tables, and fire bowls that will not light, will not stay lit, or burn with a weak or uneven flame. Sound Fire Solutions repairs natural gas and propane fire pits across the Eastside, including ignition systems, burners, valves, and regulators, whether or not we built them. We also handle seasonal fire pit maintenance: cleaning, leak checks, ignition tests and winterizing.
Smell gas at the fire pit? Shut the gas off at the key valve and do not light it. If the smell is strong or will not go away, move away from it and call PSE at 1-888-225-5773 or 911. Gas leak repair
- ★★★★★5.0 on Google
- Family owned since 2005
- Licensed, bonded & insured
- WA Contractor License KIMBAM*946M1

Fire pit won’t light?
Outdoor ignition parts live in the rain, so they wear faster than anything inside the house. A cracked igniter, a failed flame sensor, or a module that has taken on water will stop the fire from lighting or shut it off after a few seconds.
- Fire pit won’t light or won’t stay lit
- Spark igniter replacement
- Thermocouple and flame sensor replacement
- Ignition module and transformer repair
Burner, valve, and flame problems.
A low or uneven flame usually means a clogged or rusted burner, a failing valve, or a propane regulator that is not delivering enough gas. We inspect the whole gas train before recommending parts.
- Low or uneven flame inspections
- Clogged or rusted burner replacement
- Key valve and control valve replacement
- Propane regulator and hose replacement


Smell gas at the fire pit?
A gas smell at the fire pit means a leak at a fitting, the valve, or the line. Shut the gas off at the key valve, do not light it, and have it checked. Leaks are fixed by our gas leak repair service, and regular maintenance heads off most breakdowns.
- Gas leaks at fittings and connections (gas leak repair)
- Key valve and control valve replacement
Seasonal gas fire pit maintenance.
Northwest rain, falling leaves and spiders are hard on outdoor burners. Insects nest in burner ports and orifices, and debris settles under the media. Our fire pit maintenance clears it out, refreshes the media and tests the ignition, so the fire pit lights on the first try all season.
- Burner port and orifice cleaning, including spider nests
- Leak testing at the connections
- Ignition system testing
- Fire glass and lava rock cleaning or refresh
- Winterizing, cover fitting and spring startup

From a cold fire pit to lit again.
What happens after you call, so you know what to expect at every stage.
Call
Tell us the make, the fuel, and what it is doing. A photo of the burner and controls helps.
Diagnose
We test the ignition, gas pressure, burner, and valve to find the cause.
Repair
Most repairs are done on the first visit. Parts that need ordering get a return visit.
Test
We light it, check the flame, and confirm it runs through a full cycle.
Fire pit repair and maintenance questions.
Short answers to what homeowners ask us before the first site visit.
Question 1 of 7
Why won’t my gas fire pit light?
Question 2 of 7
Why does my fire pit light and then go out?
Question 3 of 7
Why is my fire pit flame low or uneven?
Question 4 of 7
Do you repair fire pits you did not install?
Question 5 of 7
Can a fire pit burner be replaced without rebuilding the fire pit?
Question 6 of 7
How often does a gas fire pit need maintenance?
Question 7 of 7
How do I winterize a gas fire pit?
Fire pit repair near you.
We repair gas fire pits and fire tables across the Eastside. See our full service area.
Related services: Fire Pit Installation · Gas Leak Repair · Gas Fireplace Repair & Maintenance.
Fire pit not working?
Tell us what it is doing and we will get it lit again.